The SH Series single element filter housing is constructed of 304 SS construction with an easy-to-use ring nut closure and reliable double O-ring seal. Each filter housing accepts one double open end (DOE) filter, utilizing a knife-edge seal.
Model SH-30 accepts filters from 2.5 to 2.75-inch diameter. The spring-loaded bottom seal provides flexibility for cartridge lengths of 29.75 to 30 inches. Each filter housing is supplied with a zinc plated steel mounting bracket and a special torquing tool to assist with ring nut closure. This model does not include a differential pressure gauge.
- 304 SS cast head includes two EPDM O-ring seals
- ¾ inch NPT inlet and outlet ports
- ¼ inch FNPT drain connection
- 200 PSIG / 13.8 Bar maximum pressure
- 200⁰ F / 97⁰ C maximum temperature
- Maximum pressure for hot water at 140⁰ F / 60⁰ C is 150 PSIG
- Piping and shut-off valves are by others
- Replacement EPDM or Viton O-ring seals are sold separately
Compatible string wound, melt blown, and carbon DOE cartridges are sold separately; see related products below.
These economical housings are available at a special limited time introductory price while supplies last.
These housings are for liquid service only – Do not use for pressurized gas
